ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL740 - Memory Notifications

 

DL740 - Memory Notifications

Hi All,

I am continuously getting "Memory Board or Cartridge Inserted" notifications in Insight Manager 7 when I reboot the server. I have looked everywhere in CIM and cannot find anything. So the only thing I can assume it is a server problem. It is running 10Gigs of Mem. Has anyone come across this ?

Thanks in advance
2 REPLIES
Prashant (I am Back)
Honored Contributor

Re: DL740 - Memory Notifications

Hi,

Try to clear the nv ram and check for following information on server and then check.

-----------
Any ProLiant DL740 server with a Hot Plug Memory Cartridge (Assembly Number 265595-001 or 265595-002) built between June 20, 2003 and September 12, 2003. A Hot Plug Memory Cartridge built during this timeframe can be identified by the week code embedded in the Commodity Tracking (CT) number. The CT number is located on a label affixed to the Hot Plug Memory Cartridge (see Figure 1 and Figure 2 for an example of the CT label).

The Commodity Tracking (CT) number is 14 alphanumeric digits and has the following format:

CT: XXXXXXXXX ZZ XXX (where "X" is an alphanumeric character and "ZZ" is any of the following week codes)

Can you tell me the same code so we can verify it can be due to that also.

Is it under the following catagory
ZZ= ( OY, OZ, P1, P2, P3, P4, P5, P6, P7, P8, P9, PA )

If yes then replace Hot Plug Memory Cartridges with Spares Kit Part Number 280613-001


Regards,
Prashant S.
Nothing is impossible

Re: DL740 - Memory Notifications

How do I clear the NVRAM ?