ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Deleted Partition :(

Ayman Altounji
Valued Contributor

Deleted Partition :(

hey Prosignia and compaq users, i got an Prosignia but it doesn't do anything the Partition got deleted and i can't boot with my CD-rom, i want to install Win 98 on it but how do i have to start?????
the Cd-rom is an SCSI and doesn't start with an Win 98 disk.

hope to hear from you soon
THNX
GreetZZ
5 REPLIES
Ayman Altounji
Valued Contributor

Re: Deleted Partition :(

And I am getting on Startup the ERROR like this: 178-proccesor configuration invalid?????????
What does it mean??? i only took my Proccesor out once and when i putted it back i got this message.
That where al of my problems Hope to hear form you

GreetZZ And THNX in advance
Ayman Altounji
Valued Contributor

Re: Deleted Partition :(

I had the same problem,So I download all the Drivers for do and went from there the cd drivers are there you have alot of work to do. read all the instruction and if you have a question I will try to help.....

ps I'm on my prosignia 300 with win95 right now
Ayman Altounji
Valued Contributor

Re: Deleted Partition :(

drivers for Dos
Ayman Altounji
Valued Contributor

Re: Deleted Partition :(

Hey thnx for the Reply.!!
Do you still have those Drivers you used????????
because i downloaded a Few but they don't work!

Hope to hear from you Soon
THNX
Ayman Altounji
Valued Contributor

Re: Deleted Partition :(

to partiton use this 1st Compaq System Configuration Utility (ver 2.53A)partition the compaq part at 32mb,then setup dos 6.0 or if you have the compaq dos use it " i used 6.0 then upgraded to 6.22"Then use fdisk and make a primary dos partition for your #1 drive and a primary and extented one for your other drives on the extend one make a logical drive. For the bios use Systems ROMPaq Diskette,You can find the old # when you boot ,then download the one you need and (ver 4.4 rev A) this one is the upgrade ,for your cdrom use MS-DOS SCSI Support Diskette (ver 2.18A),If you have a disk backup wait on that one.The other disks you need are Compaq Server Diagnostics (ver 10.34A) and Drive array advanced diagnosic (ver 1.44A)a.k.a. (D.A.A.D) this one i had to use search to find it.
Read it all and follow instructions.................