Detecting firmware versions on bl20p blades running linux

[Matthew Kowalewski]

I am looking to find the firmware versions on BL20P G2 and G3 blades running RedHat linux. I am not able to reboot the blades and was wondering how I can get the versions of NIC FW, Raid Card, sysrom, etc. firmware?
Thanks,
Matt

[Prashant (I am Back)]

Magement agent will do
Or for Raid ADU will do


Regards,
Prashant S.

[SIVAKUMAR.P]

Hi Matthew,

I thing this article is resolved your issues.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=487207

by
shiv.p

[Prashant (I am Back)]

Hi Shiv,

You are right but with new management agent i dont htink so you get survey file. Or else it is the good option. So if box is running with new mangement agent then to srvey file.

Regards,
Prashant S.

[Prashant (I am Back)]

Hi Shiv,

You are right but with new management agent i dont think so you get survey file. Or else it is the good option. So if box is running with new mangement agent then to srvey file.

Regards,
Prashant S.

[Matthew Kowalewski]

Thanks for the responces.
I tried survey and its not on the system.
I found the sysrom version in the ILO, the raid controller on the management page and I am still looking for the NIC fw version.
Thanks again.
Matt

[Matthew Kowalewski]

I am still looking for a way to find the NIC FW version. Any ideas?
Matt

[Matthew Kowalewski]

need to download and install nic fw upgrade rpm.
after it is installed run hpnicfwupg -c to get the verion of fw on the nic.