ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Detecting firmware versions on bl20p blades running linux

 
Matthew Kowalewski
Occasional Contributor

Detecting firmware versions on bl20p blades running linux

I am looking to find the firmware versions on BL20P G2 and G3 blades running RedHat linux. I am not able to reboot the blades and was wondering how I can get the versions of NIC FW, Raid Card, sysrom, etc. firmware?
Thanks,
Matt
7 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Detecting firmware versions on bl20p blades running linux

Magement agent will do
Or for Raid ADU will do


Regards,
Prashant S.
Nothing is impossible
SIVAKUMAR.P
Frequent Advisor

Re: Detecting firmware versions on bl20p blades running linux

Hi Matthew,

I thing this article is resolved your issues.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=487207

by
shiv.p
24/7 SUPPORT Mobile.No:919841509428
Prashant (I am Back)
Honored Contributor

Re: Detecting firmware versions on bl20p blades running linux

Hi Shiv,

You are right but with new management agent i dont htink so you get survey file. Or else it is the good option. So if box is running with new mangement agent then to srvey file.

Regards,
Prashant S.
Nothing is impossible
Prashant (I am Back)
Honored Contributor

Re: Detecting firmware versions on bl20p blades running linux

Hi Shiv,

You are right but with new management agent i dont think so you get survey file. Or else it is the good option. So if box is running with new mangement agent then to srvey file.

Regards,
Prashant S.
Nothing is impossible
Matthew Kowalewski
Occasional Contributor

Re: Detecting firmware versions on bl20p blades running linux

Thanks for the responces.
I tried survey and its not on the system.
I found the sysrom version in the ILO, the raid controller on the management page and I am still looking for the NIC fw version.
Thanks again.
Matt
Matthew Kowalewski
Occasional Contributor

Re: Detecting firmware versions on bl20p blades running linux

I am still looking for a way to find the NIC FW version. Any ideas?
Matt
Matthew Kowalewski
Occasional Contributor

Re: Detecting firmware versions on bl20p blades running linux

need to download and install nic fw upgrade rpm.
after it is installed run hpnicfwupg -c to get the verion of fw on the nic.