cancel
Showing results for 
Search instead for 
Did you mean: 

Disabling CPUs

 
Ayman Altounji
Valued Contributor

Disabling CPUs

We have a 6400R running NT 4.0 with 4 active CPUs. Due to software licensing limitiations we need to disable all but one of them. Can this be done, and if so where do I find documentation on how to do it?

I do not have access to the machine to get the serial number, however I can get it if necessary.
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Disabling CPUs

Add /onecpu to the boot.ini file.
Ayman Altounji
Valued Contributor

Re: Disabling CPUs

You may also be able to use the System Configuration Utility to mark the processors as disabled also.