ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Disc Administrator

 
Ayman Altounji
Valued Contributor

Disc Administrator

I have added a 9.1 GB drive to three others in a raid 5 array. Should I be able to see the new free space in the NT Disc administrator?
1 REPLY
Mark Cloutier
Respected Contributor

Re: Disc Administrator

You need to run the Array Configuration Utility. You can access this from booting off the Smart Start cd and choose the appropriate Utility or install it into NT.
You need to highlight the array, then choose EXPAND. More the HDD over to the right side of the window, then you highlight the Logical drive and then choose EXTEND. Once the strip set has been rebuilt then you can go into Disk Admin and there you should see you free space.
We are here for a good time, not a long time!