HPE Community
ProLiant Servers (ML,DL,SL)
1753487 Members
4722 Online
108794 Solutions
New Discussion

Re: Disk Stack

 
Ayman Altounji
Valued Contributor

‎04-26-2001 04:00 PM

‎04-26-2001 04:00 PM

Disk Stack

We have recently relocated a Proliant ML570 with a Disk Stack x6, Upon rebut at the new location the Disk Stack, all of which are 18.2 g. had red and green lights showing on Disk 3 and Disk 6. Everything is working fine however we are not sure why the red and green lights are showing.
0 Kudos
Reply
1 REPLY 1
Mark Cloutier
Respected Contributor

‎11-13-2001 04:00 PM

‎11-13-2001 04:00 PM

Re: Disk Stack

check cabling/ pinouts on the scsi cable and scsi backplane board..if they appear bent or damaged then replacement is necessary..if those drives are working fine but red lighting it has something to do with the wire pinouts ...
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.