HPE Community
ProLiant Servers (ML,DL,SL)
1753503 Members
5002 Online
108794 Solutions
New Discussion юеВ

Re: Disk drive light fail

 
tommy martinsen
New Member

тАО04-21-2010 12:54 AM

тАО04-21-2010 12:54 AM

Disk drive light fail

I just got a new DL 380G6, i put in 2 146 Gigs disks and 6 300 Gigs sas drives, all drives are in use but there are no lights in the 4 drives on the right hand side, all drives are visible in the setup and i can configure all of them, the only thing wrong is that the drive lights are missing, latest firmware are installed ( 3.0 ) on the controller. any ideas?
0 Kudos
Reply
2 REPLIES 2
TTr
Honored Contributor

тАО04-21-2010 03:40 AM

тАО04-21-2010 03:40 AM

Re: Disk drive light fail

Ensure that the SAS cable that goes to those 4 drives is firmly connected on both ends.
0 Kudos
Reply
wobbe
Respected Contributor

тАО04-21-2010 12:48 PM

тАО04-21-2010 12:48 PM

Re: Disk drive light fail

The HD lights are on the backplane it could be defect. I've seen it with other generation HP Servers.
I would call HP for support.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.