HPE Community
ProLiant Servers (ML,DL,SL)
1752801 Members
5403 Online
108789 Solutions
New Discussion

Display driver conflict with Remote Insight L.O. Ed

 
Ayman Altounji
Valued Contributor

‎11-22-2001 04:00 PM

‎11-22-2001 04:00 PM

Display driver conflict with Remote Insight L.O. Ed

Hi,
I've my DL580 running with problems when I try to use a Remote Insight Board.

The ATI 3D Rage II Display driver doesn't work when the RIB is installed on the server.

Then when I remove the RIB the ATI driver works well.

Any ideas ?

Thanks
Edgar (Mty-Mexico)
0 Kudos
Reply
1 REPLY 1
Mark Cloutier
Respected Contributor

‎11-26-2001 04:00 PM

‎11-26-2001 04:00 PM

Re: Display driver conflict with Remote Insight L.O. Ed

firstly if you use the rib card you should be connecting the video to it and disabling the onboard video (6 bank dip switch on system board.flick switch 1 on)
second..are the video drivers you are using the compaq drivers or the ones from ATI? if they are compaq the above needs to be done..if they are straight from ATI then you are using the wrong driver which is incompatible with the rib loe board
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.