ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Display is not working

Yacine SID AHMED
Occasional Visitor

Display is not working

On a Proliant ML350 server G4p server, everything seems to be working but it is not possible to run the display...
Any suggestions on how to proceed to recover the display ?
Thanks.

y.
4 REPLIES
Venkatesh BL
Honored Contributor

Re: Display is not working

What is the error you get?
Yacine SID AHMED
Occasional Visitor

Re: Display is not working

Actually I can't see any error message because my monitor keeps been black.
It is quite difficult for me to make any investigation without displaying so I think I will try to get another vga card...

y.
KarloChacon
Honored Contributor

Re: Display is not working

check system board only after extensive troubleshooting you can determine if it is the video that is bad or another component in System Board

try reseating parts, Procs, memory, ...
check system board for any LED
minimize server only 1 Proc, 2 DIMMs, no PIC cards
try pinging server if you get any response
and so on
Didn't your momma teach you to say thanks!
Gokul Chandola
Trusted Contributor

Re: Display is not working

Hi,
If you are talking About windows;
There is Two option what I am getting...
1. Login through and remove Display driver.
Then you are able to see display.
2. Now you use proper display driver with setting of max color support as per your monitor.

If any confusion use 600x800.

Regards,
Gokul Chandola
There is always some scope for improvment.