Dl 120 g5 unknown device with windows server 2008 r2

[Giuseppe Masotina]

Hi all,
i have a problem to install windows server 2008 R2 on hp dl120 g5: in device management there is one unknown device under other device item. All the devices are ok (vga,network, etc). I think the problem is the same of this (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01442875〈=en&cc=us&taskId=130&prodSeriesId=3683705&prodTypeId=15351) but there isn't nothing on web about this problem with the R2 release of windows 2008 server.
Thanks in advance for any reply.

[marcus1234]

welcome to the forums

just use 2008 drivers

enjoy

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)
if still error post screenshot of device id from unknown drivers

[Giuseppe Masotina]

Thanks Mark for the reply.
The id hw of the unknown device is ACPI/HPI0002.
This problem was fixed for the windows server 2003 R2 and windows server 2008 with the drivers cp008464.exe (for x64) or cp008632.exe, but doesn't works with windows 2008 R2.
I need a similar driver to cp008464.exe but for windows 2008 R2.

Thanks in advance

[Fabio Perencin]

Hi all,

i have the same problem too with a ML110 G5 on Windows Server 2008 R2. The same hw id ACPI/HPI0002. I Installed all driver in the downloaddriver & support but i have the the same result.
Do you solve the problem?

thanks all

[Erdogan Temur]

Hi Giuseppe Masotina,

cp008464.exe is the install manually. will work.

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

[John Gillespie]

I have the same problem on an ML115 running W2K8 R2. cp008464.exe fails with "The software is not supported for installation on this system. The OS is not supported." The problem here folks is that R2 is a 64 bit OS and cp8464 is for a 32 bit O/S. HP, do you have a 64 bit driver for the ACPI?