ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Dl 120 g5 unknown device with windows server 2008 r2

Giuseppe Masotina
Occasional Visitor

Dl 120 g5 unknown device with windows server 2008 r2

Hi all,
i have a problem to install windows server 2008 R2 on hp dl120 g5: in device management there is one unknown device under other device item. All the devices are ok (vga,network, etc). I think the problem is the same of this (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01442875〈=en&cc=us&taskId=130&prodSeriesId=3683705&prodTypeId=15351) but there isn't nothing on web about this problem with the R2 release of windows 2008 server.
Thanks in advance for any reply.
5 REPLIES
marcus1234
Honored Contributor

Re: Dl 120 g5 unknown device with windows server 2008 r2

welcome to the forums

just use 2008 drivers

enjoy

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)
if still error post screenshot of device id from unknown drivers



Giuseppe Masotina
Occasional Visitor

Re: Dl 120 g5 unknown device with windows server 2008 r2

Thanks Mark for the reply.
The id hw of the unknown device is ACPI/HPI0002.
This problem was fixed for the windows server 2003 R2 and windows server 2008 with the drivers cp008464.exe (for x64) or cp008632.exe, but doesn't works with windows 2008 R2.
I need a similar driver to cp008464.exe but for windows 2008 R2.

Thanks in advance
Fabio Perencin
Occasional Visitor

Re: Dl 120 g5 unknown device with windows server 2008 r2

Hi all,

i have the same problem too with a ML110 G5 on Windows Server 2008 R2. The same hw id ACPI/HPI0002. I Installed all driver in the downloaddriver & support but i have the the same result.
Do you solve the problem?

thanks all

Re: Dl 120 g5 unknown device with windows server 2008 r2

Hi Giuseppe Masotina,

cp008464.exe is the install manually. will work.

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
John Gillespie
Occasional Visitor

Re: Dl 120 g5 unknown device with windows server 2008 r2

I have the same problem on an ML115 running W2K8 R2. cp008464.exe fails with "The software is not supported for installation on this system. The OS is not supported." The problem here folks is that R2 is a 64 bit OS and cp8464 is for a 32 bit O/S. HP, do you have a 64 bit driver for the ACPI?