HPE Community
ProLiant Servers (ML,DL,SL)
1753826 Members
8740 Online
108805 Solutions
New Discussion

Re: Dl120 G6 Upgrade Firmware

 
Zabidin1
Occasional Contributor

‎03-08-2016 11:09 PM

‎03-08-2016 11:09 PM

Dl120 G6 Upgrade Firmware

Hi, We have this server and run using controller P410i. But this controller using old firware. It did not have menu bootloader from logical.

This server not install OS because it cannot boot from this controller. I already set in ROM Utility. On controller i already create 3 logical drive. As it cannot boot i cannot continue install OS.

How to upgrade this controller? As i said it cannot boot disk from this controller. Please advice to me.

Thanks,

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-09-2016 05:05 AM

‎03-09-2016 05:05 AM

Re: Dl120 G6 Upgrade Firmware

You should get the latest SPP 2015.10 and boot from, it has P410i version 6.64.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.