ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Dl160se G6 - P410 Smart Array issues after upgrading firmware to 5.06B

 
sequeiraca
Occasional Advisor

Dl160se G6 - P410 Smart Array issues after upgrading firmware to 5.06B

Long story short.

Upgraded firware on the P410 on my DL160se G6 servers to version 5.06B per this link:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3896024&swItem=MTX-e5576e909ba74793ace3a01738&prodNameId=3896045&swEnvOID=4064&swLang=8&taskId=135&mode=3

 

Now I get various disk controller errors about not finding hard drives on boot up. I have to hard reset a couple of times before it comes up cleanly.

 

if it happened on one server I cna blame it on dodgy disk controller. But so far I applied it to five DL160se G6 servers and everyone of them are showing the exact same symptoms.

 

Have attched 3 screen shots. the first two are of the various errors on boot up. Teh last oen is the error I get when trying to install win2k3.

 

Anyone have similar issues when upgrading firware for the P410 on a DL160se to 5.06B?

1 REPLY