1748178 Members
4272 Online
108758 Solutions
New Discussion

Re: Dl360 G6

 
David8219
Occasional Contributor

Dl360 G6

Hi I wonder if someone could help me I have the dl360 generation 6 server the fans are running at 80% and it gets very noisy I have four hard drives fitted i had ilo2 1.81 I upgraded to 2.33 to see if that would solve the problem I know this had a problem back in 2010 but I upgraded to the latest version and still no effect the fans are still running at 80% they start off at around 17% but increase
2 REPLIES 2
SanjeevGoyal
HPE Pro

Re: Dl360 G6

Hello,

 I would suggest you to have a proper case be logged with HP, and share the appropriate logs for further analysis.

If the Bios & ILO updated with the latest as well as make sure no third party hardware ( none-hpe hardware) installed in the server.

Especially, the hard disk should be HPE make.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

sgunelius
Trusted Contributor

Re: Dl360 G6

Are you running latest BIOS?  I saw an article (see below) that talked about a similar problem:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c01925863

Also, I seem to recall once you installed the Management Agents that would dial back the fans to a manageable level.