HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Doubt to Modify arrays and Strip Size /Full Strip Size/Sectors/Track and Size

 
Laritza
Occasional Contributor

Doubt to Modify arrays and Strip Size /Full Strip Size/Sectors/Track and Size


When you explained about the controller in my case this is HP H240 ar but I do not have saved information in the logical drive 4,that is to say in my second array B.If my second array is an independent and different bay for example bay 2, how can I add this array B with the first array A?? or in the moment that I delete array B,I create it again and then I choose level RAID 1 in array B,
will create the array B the same logical drives that the array A in the same moment with RAID 1?

Another doubt is:
When I define the RAID level 1 which are the recommended values to have in account with:

Strip Size /Full Strip Size/Sectors/Track and Size?, I am looking for about this because i need to expose some ideas and then test it in two servers,thanks in advance

1 REPLY
sharugs
Regular Visitor

Re: Doubt to Modify arrays and Strip Size /Full Strip Size/Sectors/Track and Size

Hello,

Refer user guide https://support.hpe.com/hpsc/doc/public/display?docId=c03909334

from page 27 you have those information.

cheers,

sharath