ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive Array Physical drive Monitoring

 
Luce_1
Occasional Visitor

Drive Array Physical drive Monitoring

Following warning keeps occuring (system log)

Drive Array Physical drive Monitoring is not enabled. The physical drive in slot 4, port 1, bay 0 with serial "...", does not have drive thershold monitoring enabled.

Preformance is very low (800 mb takes 10 minutes to copy). first half is copied in 15 seconds then the proces seems to hang, after a minute copy proces continues (takes another 8 minutes)

How do i resolve this issue and what is the normal data rate (riad5 (array 641)3x 36g 10k)
1 REPLY

Re: Drive Array Physical drive Monitoring

Hi

In the first place check whether you have installed the support pack.

Try to see the errors on the drive through local server agents

Finally run a diagnostic test on the drive

Regards,

Varuna.