ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive LEDs non-functional

 
Ayman Altounji
Valued Contributor

Drive LEDs non-functional

We have a ML530 which has 6 36gig drives in it. Under normal operation, the drives show a green colored cylinder LED that remains lit all the time. When the drives are accessed (read/write), then a little green arrow LED flashes on/off. Also, when you go into the array manager, there is a green cylinder with a red X LED that shows up, to tell you that you are accessing the drives through the array manager... this doesn't work either. Why are my drive lights not working anymore. FYI... there are no messages in the event log that show me any failure and the diskmanager shows healthy drives/volumes etc. What gives?

TIA... Mitchell
1 REPLY
Mark Cloutier
Respected Contributor

Re: Drive LEDs non-functional

the led's are given their info through a pinout on the scsi cable..check cables and replace if necessary..also cehck the connectors to see for bent pins
We are here for a good time, not a long time!