ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive RomPaq update

 
Anthony Della Cioppa
Occasional Visitor

Drive RomPaq update

When i start up my system (Prolaint DL380 G2 P24)it tells me the drive in SCSI Port2 SCSI ID 0,1,3,4,5 need their firmware updated.

I down load sp19682 and created the disks. I loaded the floppy #1 in and reboot the system. The screen comes up, showing which drives need updating. (FA7A768, FA6D986, FA5AX98) I proceeded with updating FA7A768, it asked for disk #3, i inserted it and it preform the update. I next selected FA6D986, and it asked for disk #9, i inserted it and it updated the drive. I then selected FA5AX98, it asked for disk #9, inserted it. It reads the disk then comes back and tells me that i need to use ROMPaq Disk#3 and refresh the device. I inserted disk #3 and refreshed. Reselected the drive(s), it reads the disk and comes back and tells me that i need to use ROMPaq Disk #9 and fresh the devices. I do and this continues round and round with out it updating the drives (1,3,4)

Can anyone help?