ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive cage for HP ML150 G6

 
Tiansen
Occasional Visitor

Drive cage for HP ML150 G6

Hello!

I have server ML150 G6 and now want to add 4 additional drives to it. I already have ordinary SATA drives from WD and I want to use them. Can somebody please give me information which drive cage I need to do that (order/part nr., link or anything else)? Is it true that you can get it only if you buy drives from HP (for example RENEW)?

Thank you very much!
3 REPLIES

Re: Drive cage for HP ML150 G6

Hi,

SPS-CAGE, HOT PLUG 519733-001 (Original cage)
HP 5U Hot Plug Drive Cage kit : 487737-B21 ( Optional cage)

NOTE: Supports up to eight (8) SAS/SATA hard drives via 2nd hot plug hard disk drive cage, 750W CS HE Power Supply, Redundant Power Supply Enablement Kit and HP Smart Array P410 Controller.

This should help

That will also fix the problem :) Remember to assign points to answers that helped in your problem. So the forum stays alive...
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Tiansen
Occasional Visitor

Re: Drive cage for HP ML150 G6

Thank you for your answer. It seems that these cages are for hot-plug drives? I need a cage into which i can mount ordinary desktop 3.5'' drives.
Jan Soska
Honored Contributor

Re: Drive cage for HP ML150 G6

I am afraid it is not possible buy empty cages... but maybe I am wrong... :*

jan