HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive keeps on being unassigned after reboot - B120i Raid Controller (DL320e G8)

 
nickuno
Occasional Visitor

Drive keeps on being unassigned after reboot - B120i Raid Controller (DL320e G8)

Hello,

I've disconnected my disc drive, and instead have opted in to install a SSD instead. The SSD is recognised by the system, under the B120i Embedded Raid Controller. I create a logical drive of RAID 0, rescan the system to see if it's completed, and it's all good! After I reboot the system, the system states that no logical drives have been installed on that raid controller. I open up the raid utility, and it shows that no logical drives have been created! What's the issue?

I also have a B220i raid card installed in the system as well, which works perfectly fine with 4 x 3TB drives installed, all under RAID 0, which is not affected by the above.

Thank You!