ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive monitoring is NOT enabled

 
Alexander Fok
Occasional Visitor

Drive monitoring is NOT enabled

System Model: ProLiant DL360 G5
When I run Array Diagnostic Utility
I receive the following error report:
SLOT 0 Smart Array P400i Controller ERROR REPORT:

Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 1
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 2
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 3
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 4
Drive monitoring is NOT enabled for Port 2I, Box 1, Bay 5
Error occurred reading RIS copy from Port 1I, Box 1, Bay 1
Error occurred reading RIS copy from Port 1I, Box 1, Bay 2
Error occurred reading RIS copy from Port 1I, Box 1, Bay 3
Error occurred reading RIS copy from Port 1I, Box 1, Bay 4
Error occurred reading RIS copy from Port 2I, Box 1, Bay 5

===========

I attach here the full report. Is there anything wrong? what shuold I do?
Many thanks in advance for your advice.
1 REPLY
Mauro Rusignuolo
Trusted Contributor

Re: Drive monitoring is NOT enabled

first of all, install the last HP PSP.
update the controller firmware also.

7.80.6.0 ACU and 7.80.2.0 7.ADU are availeble.

also, you controller firmware it's a little bit old ...

bye.

TJK.
<> Leonardo da Vinci