HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drive rebuild issue

 
hairang
Occasional Contributor

Drive rebuild issue

We have 2 logical drives mirrored with 2 physical drives.

One drive is failed and we replaced it. One of the logical drive shows rebuild completed. But the other logical drive status shown as Ready to build. But after a long 24 hours wait also it is not initiated. Removed the newly replaced drive and placed another new drive but same story

Can anybody suggest what needs to done on this
4 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: Drive rebuild issue

hi,

did you try to restart the server ??

i know what you maybe think, but sometimes its very good to do it.

mikap
hairang
Occasional Contributor

Re: Drive rebuild issue

Hi

Yes We tried rebooting the server and now again the drive shown as predictive failure
Michal Kapalka (mikap)
Honored Contributor

Re: Drive rebuild issue

hi,

if you would try to call HP supported the first question will be if you have the latest firmware on the RAID controller.

Did you try to update the firmware ??

mikap
hairang
Occasional Contributor

Re: Drive rebuild issue

it is one level lower than the latest one