Driver for BL20p FCA mezzanine card

[Greg Kirkness]

I am trying to connect some BL20p G3 blades to our EVA5000. The blades have the QLogic dual-port mezzanine SAN attach board installed.
I have built the blades on SmartStart 7.10, but the FCAs come up with no drivers installed.
I have tried several drivers from the HP site, but none want to install.
Can anyone point me at the correct driver for these FCAs??
Thanks

[Steven Clementi]

I am going to assume you mean you tried the drivers located at this site...

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=315741&locale=en_US&taskId=135&prodTypeId=12169&prodSeriesId=315739&swEnvOID=181

If not, then please do try. The latest Platform Kit should also have the right drivers. Platform Kit is located here...

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=321354&locale=en_US&taskId=135&prodTypeId=12169&prodSeriesId=321347&swEnvOID=1005

I also assumed your using Windows. You should be able to easily navigate back a pag and select the correct OS or just click the following link...

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=315741&taskId=135&prodTypeId=12169&prodSeriesId=315739〈=en&cc=us

Which SAN Switches, might I ask, are you using?

Steven