ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Drivers for HP ProLiant DL180 Gen9 Server

Kalinka
Occasional Contributor

Drivers for HP ProLiant DL180 Gen9 Server

Hi All,

 

I was wondering if you could advise how the follworig drivers for HP ProLiant DL180 Gen9 Server could be obtained:

 

RAID controller drivers

 

PCI\VEN_8086&DEV_8D66&SUBSYS_8030103C&REV_05

PCI\VEN_8086&DEV_8D66&SUBSYS_8030103C

PCI\VEN_8086&DEV_8D66&CC_010400

PCI\VEN_8086&DEV_8D66&CC_0104

 

Thank you in advance,

 

Best regards,

5 REPLIES
Suman_1978
HPE Pro

Re: Drivers for HP ProLiant DL180 Gen9 Server

Hello,

 

VEN_8086 refers to Intel Corporation.

Check in Device Manager to see any ! marks on devices.

 

Suggested drivers for this issue is Chipset, iLO4, Graphics and Network.

http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7252821

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

OzerovE
Occasional Visitor

Re: Drivers for HP ProLiant DL180 Gen9 Server

Trentsuresh
Occasional Visitor

Re: Drivers for HP ProLiant DL180 Gen9 Server

Hi All,

 

I am facing the same issue,  I have pdated the latest service pack but my Device Manager showing exclamation mark on "Raid controllers" 

 

 

 

RAID controller drivers

 

PCI\VEN_8086&DEV_8D66&SUBSYS_8030103C&REV_05

PCI\VEN_8086&DEV_8D66&SUBSYS_8030103C

PCI\VEN_8086&DEV_8D66&CC_010400

PCI\VEN_8086&DEV_8D66&CC_0104

 

Thank you in advance,

 

Best regards,

solovyev
Occasional Visitor

Re: Drivers for HP ProLiant DL180 Gen9 Server

 "PCI Device"   - dowload B140i   driver from HP support.   extract drivers and update from path to extract. solved

 "Raid driver" - PCI\VEN_8086&DEV_8D66&SUBSYS_8030103C&REV_05     -  googling   results Dynamic Smart Array B140i 6 port unknown device ,  but downoaded drivers dont work.   Problen on 2 SERVERS  (win2008x64   win2012x64) looking for solution on...

 2008

 2012

 

Jimmy Vance
HPE Pro

Re: Drivers for HP ProLiant DL180 Gen9 Server

If you are installing the system when the ROM is set to Legacy BIOS mode, the B140i RAID mode cannot be used.. You need to also change the SATA controller option to SATA AHCI instead of B140i RAID.   Without changing the SATA controller option the device identifies as the B140i device on the PCI bus instead of just a plain SATA controller




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!