Dual Nic - ML370 G3

[Sam71]

Hi all,

We have a Proliant ML370 G3 which is only showing 1 NIC in the system properties on W2K3!

Is there a way to deisable/enable the second NIC on these servers?

Cheers, Scott

[KarloChacon]

hi

sorry If I wrong in the quickspecs says
Network Controller
Integrated NC7781 PCI-X Gigabit NIC (single port)

so Single Port just one NIC physically

http://h18000.www1.hp.com/products/quickspecs/11450_na/11450_na.html

regards

[Sam71]

Ah Ok!

It has 2 NIC ports so I assumed that both would be GB!

Cheers
Scott

[Brian_Murdoch]

Hi Scott,

One of the ports is the ILO port so it can't be used as a normal NIC port. Please see attached document (Items 3 and 4 on rear view of chassis).

I have attached a list of supported NIC's for the ML370 G3 to the bottom of this document.

Regards,

Brian

[Sam71]

Thanks guys!

I didn't realise thats what it was for!

Cheers

Scott