HPE Community
ProLiant Servers (ML,DL,SL)
1753802 Members
8200 Online
108805 Solutions
New Discussion

Re: Dual-home Server

 
Ayman Altounji
Valued Contributor

‎01-28-2001 04:00 PM

‎01-28-2001 04:00 PM

Dual-home Server

I just finished configuring a Proliant ML370 server using the Smart Start CD and put SP 6a on the server. I need to dual-home the server on ethernet and token ring. I currently have the integrated ethernet card activated. When I install the token ring card (ISM 16/4 Token-Ring PIC Adapter 2), the server locks up at NTDETECT. It just sits indefinitely at the NTDETECT screen. I have tried to install the card in different PCI slots to no avail. I have taken a card from a working computer to see it was a bad NIC. No luck there. I have used Compaq diagnostic and it detects and adds the card to its config correctly. Is there a setting change I need to make for server and/or card? I have been able to dual-home the Proliant 1600 server before they retired the model. Any help would be gladly appreciated.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎04-02-2001 04:00 PM

‎04-02-2001 04:00 PM

Re: Dual-home Server

What token ring card is this? Do you mean an "IBM 16/4 Adapter 2" (that was ISA based, not PCI)?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.