Dynamic Smart Array B120i doesn't find any supported drives

[Riandie]

We have a DL360e Gen8.

With 2 15K SAS 450GB 653951 attached to the controller.

I tried to Config the controller with the 2 drives attached. If I start ACU and got an error code 267.

Can anyone help me with this?

[Jimmy Vance]

Make sure your running a version of ACU that supports the B120i. (if your running from the F5 prompt you should be good). Have you installed a license key for SAS drive support? 

[Jimmy Vance]

Edit to my above post, the B120i only supports SATA drives, the B320i can support both SATA and SAS.  The solution is to get SATA drives, or install a controller that supports SAS