ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

E100 NIC Driver

Ayman Altounji
Valued Contributor

E100 NIC Driver

I am trying to build & load the Ethernet Drivers for the onboard dual-port nic .... the make seems to run fine, however when I try to load the drivers I get the following error:

/lib/modules/2.2.12-20/net/e-100.o:init_module:device or resource busy.

HELP?!?
1 REPLY
Ayman Altounji
Valued Contributor

Re: E100 NIC Driver

I had a lot of problems with the onboard NIC's on the DL360. All were caused by the fact that the OS selected for the system was set to Windows NT. It needs to be Linux. This is so the irq's are set up correctly for linux. Pop in a smart-start CD and run the system configurator. Choose linux for the OS type and reboot.