ProLiant Servers (ML,DL,SL)
1753483 Members
4318 Online
108794 Solutions
New Discussion юеВ

Re: ERROR ! ADAPTER MALFUCTIONING !

 
luongson
Frequent Advisor

ERROR ! ADAPTER MALFUCTIONING !

I Has server ML370G4, when boot is report.
"ERROR ! ADAPTER MALFUNCITONG "
"LSI logic corp, no supported devices found !" and when boot in windows server 2003 is report
" LSI_SCSI
- The driver detected a controller error on "

Help me, find error of server.
Thanks.
3 REPLIES 3
tripper91
Frequent Advisor

Re: ERROR ! ADAPTER MALFUCTIONING !

hi
ok this error is more than likely realated to your storage controller. If your hard disks are connected to a scsi controller or one is installed in the server, try booting up without it or with a replacement. Sounds like the hardware is not campatible or damaged

good luck
luongson
Frequent Advisor

Re: ERROR ! ADAPTER MALFUCTIONING !

Server has card smartarray 64x Controller, run Raid 5 and Raid 1.
Blazhev_1
Honored Contributor

Re: ERROR ! ADAPTER MALFUCTIONING !

Hi,

try checking device manager if there is unknown device found. Update driver and firmware.

http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/w2000Msgs/3647.mspx?mfr=true

http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1026&spid=global&query=%2B%22The+driver+detected+a+controller+error%22&adv=&mode=r&cat=False

Normally the Error comes with Event ID 11 in Event viewer... If updating the Firmware and Driver don't help, check in ADU if there is an error with the SA 6400(although error is shown for LSI controller)

Regards,
Pac