ERROR ON SERVER 2003 on HP Proliant ML 350 G3

[José Gómez]

Hi, we have a HP Proliant ML 350 G3 with Microsoft SERVER 2003 Standard Edition, with Servipack 1 RC2, recently we installed 2, 3.06Ghz Intel Xeon Procesors, and then a week later there were this problem: 0x0000000a (0x80bfffe8, 0x00000002, 0x00000001, 0x804f1978) and then we solve it witn a BIOS UPDATE, but a week later give us this error: 0x0000008e (0xc0000005, 0x8083c08e, 0xf2cc3b30, 0x00000000), Please Could anybody Help Us to fix This Problem.
Thank You,
Jose Gómez

[Kai-Uwe Schurig]

Hi,

first of all: SP1 RC2 seems to be not offical supported by HP. There are some problems with SP1 RC2, look here:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CB0204W

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EM041209_CW01

Also you sould make sure that you have the latest System ROM installed, there were some critical bugfixes in the latest versions.

http://h18004.www1.hp.com/support/files/server/us/download/21988.html

---cut---
version 4.10 D14-09/15/2004 (11 Oct 04)

Updated to integrate the latest Intel processor support code into the System ROM. This works around an issue with the Intel Xeon processor that could cause unexpected behavior or system hang.
The firmware update, Version 4.10 D14-09/15/2004, contains critical bug fixes and is the minimum version required. Please perform the update at your earliest convenience. Click on the underlined Version to view more details on the fixes.
---cut---

Regards,

Kai-Uwe

[José Gómez]

Thanks Kai,

I've already update the version 4.10 D14-09/15/2004 Bios on my Server, it fix the problem, but its only for 1 day, and then again show diferents types of crashes (errors), its like a chain, í've packed some of the errors in a ZIP File, so please, could you check this Zip File,

So I Should Uninstall Windows Server 2003 SP1 RC2?

Thanks for the Reply

Best Regards!!!
José G

[Kai-Uwe Schurig]

Hi,

try to uninstall SP1 RC2 an look if this helps.
Regarding your error messages, here are some articels from the MS knowledgebase:

error 0x0000000a

http://support.microsoft.com/default.aspx?scid=kb;en-us;130802

http://support.microsoft.com/default.aspx?scid=kb;en-us;836049

error 0x000000D1

http://support.microsoft.com/default.aspx?scid=kb;en-us;867772

Looks like a problem with a driver for a component in your server (like Array Controller or network card).
I guess that the current HP drivers are not compatible withe the SP 1 RC2 for Windows 2003.
Could also be a hardware problem (e.g. hard drive subsystem or anything else).

Kai-Uwe

[José Gómez]

Thanks Kai;

I Fomat my server yesturday, but, i have the same problem, but i left the D-14 Bios Rev. 09/10/04 on the system ,

*Should I Uninstall 1 3.06 Ghz Intel Xeon Processor from my Server, What should i do?
*Sould I install all the Windows Updates for my server 2003?


because i'm having this problem since i install those 2 processors,

Thanks for the reply!!!

Best Regards from
José GÃ

[Kai-Uwe Schurig]

Hi,

ok, so it seems to be more a hardware releated problem.
Try to remove the processor you have added and look if this helps.

Kai-Uwe