ProLiant Servers (ML,DL,SL)
1747985 Members
4741 Online
108756 Solutions
New Discussion юеВ

Re: Enable Fibre Controller on BL460C

 
vcentertainment
Occasional Contributor

Enable Fibre Controller on BL460C

Hello,

How do I enable the Fibre connectivity on the back of our BL460C enclosure to be seen by our server blades inside of the enclosure?

I've reviewed the documentation but haven't found a way to do this yet. We are running Win2K8 64bit on each server blade.

Thanks,

~ Jon
3 REPLIES 3
WFHC-WI
Honored Contributor

Re: Enable Fibre Controller on BL460C

It may depend on what type of module you have installed. You may need to use the Virtual Connnect Manager interface.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00865618/c00865618.pdf
vcentertainment
Occasional Contributor

Re: Enable Fibre Controller on BL460C

Thanks for the info, I found Virtual Connect.

One last issue, launching the installer says I need to launch remote desktop with the "/console" switch, which I tried (along with "/admin") and neither seem to allow me to launch the installer.

I am trying to install on Win2k8 64bit.

Thanks,

~ Jon
vcentertainment
Occasional Contributor

Re: Enable Fibre Controller on BL460C

Okay rather then fuss with the install DVD I just downloaded the files from the support website, thanks.