Enable ILO on ML370

[Antonio Traetto]

Can anyone confirm the process for enabling the ILO on an ML370?

Regards,

Tony.

[Leon Rosier]

Tony,

ML370 r01 does not have ilo, so what type of ML370 do you have?

Leon

[Antonio Traetto]

Remote Lights-Out Edition II - RILOE II (specified as an option).

Am so used to using ILO as the short name, above is what I meant.

[Leon Rosier]

Insert the RiloII board in slot 1 or 2. If you want to use the virtual power button, you have to connect the cable with part: 160011-001.
The external AC/DC adapter is reccommended and you will need the Keyboard/Mouse cable that came with the board.
Connect the monitor to the Rilo Board.
If the ML370 has a F10 partition of which i'm not sure you have to configure the card in there. If there is a F9 setup you don't have to do anything.
After power on, wait for the prompt to enter the RILO setup (I think it is F8) to configure the Rilo board

Leon