HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Enable enhanced mode on DL320 SATA controller

 
cphillips
Occasional Visitor

Enable enhanced mode on DL320 SATA controller

I am setting up Windows 2003 Server on a DL320 G4 that we have just purchased. When I try to install without the RAID option enabled I am unable to install the Intel Matrix Storage Manager as the drives are running in legacy mode. I cannot see the option to enable the enhanced mode, I can only turn on RAID mode and then I need to create an array which I don't want to do (I need to use Windows to mirror the system partition and stripe the other partitions) How do I enable enhanced mode for the drives without putting them into a RAID configuration?
1 REPLY
Terry Hutchings
Honored Contributor

Re: Enable enhanced mode on DL320 SATA controller

I don't believe you can. You should be able to create separate raid 0 arrays (one for each drive). Do you have that option? That will accomplish what you need.
The truth is out there, but I forgot the URL..