Error 207 on PL DL580 G1

[Victor_138]

After solving the mistery of removing a processor and determining that a processor blank card was needed now I'm facing the following error:

207-Invalid Memory Confguration-Mismatched DIMMs within DIMM group
Memory within 4-DIMM Group(s)not utilized
-DIMMS 1 2 3 4

and can't find any documentation around to help me understand what's going on.

I resetted the memory board and DIMMs thinking that one might be loose but that's not the case.

Any pointers?

[Mike Bollman_1]

Victor,
According to the Support Docs the 207 code means you have a DIMM installed of an supported size.

http://h200005.www2.hp.com/bc/docs/support/SupportManual/c00300504/c00300504.pdf

What size modules or part#'s are in each slot?

[Prashant (I am Back)]

Hi,

Configuration Rules

100MHz ECC SDRAM DIMMs should be from Compaq.
Four DIMMs must be installed in every bank.
All DIMMs must be the same speed, size, and type, MB and Mb.
Individual banks can be different sizes.
The server ships with at least four DIMMs in Bank #1.
Install DIMMs in consecutive socket order.

------------Part Info ------------------
128MB, 100MHz, ECC SDRAM DIMM using 64Mb memory chips 146488-001

256MB, 100MHz, ECC SDRAM DIMM using 64Mb memory chips, 170514-001

256MB, 100MHz, ECC SDRAM DIMM using 128Mb memory chips 146489-001

512MB, 100MHz ECC SDRAM DIMM using 256Mb memory chips 170515-001

512MB, 100MHz, ECC SRAM DIMM using 128Mb memory chips 146490-001

1-GB, 100-MHz SDRAM DIMM using 256Mb memory chips 170518-001

Regards,
Prashant S.

[Victor_138]

Haven't had the chance to open it. As soon as I can will take the memory board out and verify the modules.

If I'm not mistaken the memory has not been changed since the server was built. The only change was the removal of 1 processor.

[Victor_138]

The server has:

4 PC100-222-622R P/N 110957-022 (128Mb)
4 PC100-222-622R P/N 110959-042 (512Mb)

[Oleg Koroz]

110957-022 146488-001 SPS-MEM SDRAM 128MB,64Mb,CL2

110959-042 170515-001 SPS-MEM SDRAM,512MB,256Mb,CL2

http://h18000.www1.hp.com/products/quickspecs/10635_div/10635_div.HTML

Try one set of 4 after second
Verify System ROM
http://h18023.www1.hp.com/support/files/server/us/download/17421.html

Reset memory board, Clear NVRAM (need CSU to restore access to F10)