Error-HPE ProLiant ML350 Gen9 Server

[Sujithm]

I noticied  that  one of my servers is  on degraded mode as the health let is  blinking amber , advice please what steos  to  troublshoot  that.

power is  ok

[pchops]

I would start by logging into the iLO and then clicking on the "System Health" link under the "Status" section of the "Overview" page:

Then check the "Status" column on the "Subsystems and Devices" summary:

[Sebasbin]

Hi,

>>Login to server ILO and check in system information page ,system health summary and see which component is showing degraded/failed .

>>Depends on the failed component ,need to do the further troubleshooting and minimum configuration test.

>>If all the component status is OK and healthy as per ILO system information health summary, you need to do the server power drain and check the status once again.

Please go through below document for further troubleshooting the server Hardware issues 
https://support.hpe.com/hpesc/public/docDisplay?docId=a00018641en_us&docLocale=en_US