Error Install HP Network Configuration utility

[Rick_188]

Running a DL360 G3 with Windows 2003. I finally have enough ports on my gig switch to use teaming, but I am unable to install the network configuration utility. Error message in the log is:
Command Line Parameters Given: /silent

Name: HP Network Configuration Utility for Windows Server 2003
New Version: 7.86.0.0

Beginning Silent Session...

The software is not installed on this system, but is supported for
installation.

- the component will be installed

The operation was not successful.

Where can I look for more error messages, or has anyone else resolved this problem.
NIC's work fine separately.

[dospavlos]

Getting same error 'operation was not successful' during install. Tried different NICs and just about every version of the Network Utility without success. My issue is on a DL580G1 with all firmware/software up to date (7.3). If I search locally for cpqteam.exe and run it, the icon comes up in the taskbar. Clicking on icon produces error: FindComponent:cq-team Failed: 0x1

[Daniel F]

Hi,

I'm having the exact same problem with a DL360G3 on Windows 2000.

Did you ever find a solution to your problem ?

Thanks a lot,

Daniel

[pan00]

Try installing from the 7.4 SmartStart CD

[Daniel F]

Sorry, should have specified.

After installing PSP 7.40b the NCU is no longer seen on the system.

Installing NCU 8.20 (latest) results in the exact same error message as seen above

[Vwdl]

Rick,
Update the firmware on the NICs:
http://h18023.www1.hp.com/support/files/server/us/locate/69_4764.html#69
Install the newest Nic-driver :
http://h18023.www1.hp.com/support/files/server/us/locate/69_4764.html#15
Finally install Teaming from URL above.
You may need to reboot in between.
I generally do this on 1 NIC and feed the second one an apipa.
Regards
dd

[PalluX]

I am having the same issue on a DL360 G4. None of the above solutions have worked. any other ideas?

[CA1354491]

Same problem here when trying to install Network Configuration Utility version 8.30 on a BL45p, nc7782 GB adapters

Drivers have been upgraded from version 8.48 to 8.52
Firmware has been upgraded from version
1.0.0.12 to 1.0.0.13

Logfile is very low on info

Setup Session Beginning 10/04/2006 - 16:54:15
---------------------------------------------------------------------------
Command Line Parameters Given:
Beginning Interactive Session...
Name: HP Network Configuration Utility for Windows Server 2003
New Version: 8.30.0.0
The software is not installed on this system, but is supported for
installation.
The operation was not successful.
---------------------------------------------------------------------------
End Session

[dospavlos]

Go to any of your network connections that was teaming, right click, properties. Highlight the HP Network Config Utility and click Uninstall. Check other network connections if more than one. This will uninstall the utility. Reinstall nw utility. This fixes it 95% of the time. Version of NIC drivers and config util usually doesn't matter.

[CA1354491]

In my case teaming isn't installed at all so uninstalling is not an option.

Found nothing in the properties of the NICs.

We logged a Case @ HP. Hopefully they come up with an official answer which I will post off course