ProLiant Servers (ML,DL,SL)
1745809 Members
3903 Online
108722 Solutions
New Discussion

Error install cp028189.exe on Hyper-V 2012 R2 Server

 
SlaDER
New Member

Error install cp028189.exe on Hyper-V 2012 R2 Server

Hi! I have error when try to install cp028189.exe on Hyper-V 2012 R2 Server.

Server Proliand Dl380 Gen9

Can you Help Me?

 

Source:          cp028189.exe
Version:         0.0.0.0
Log Date:        6/23/2016 16:23:20

Log Session Start...

Successfully created [cp028189.exe.log] log file...

Validating WMI service is available...

WMI Service Available...Success.

Checking for virtualized environment...

Virtualized Environment not detected...Success...

Checking TPM (Trusted Platform Module) State...

Retrieving SMBIOS table (offset 0x0E[224] For TPM (Trusted Platform Module)state Verification...

SMBIOS table (offset 0x0E[224] For TPM (Trusted Platform Module) is obtained via WMI query...

on instance of MSSmBios_RawSMBiosTables...

SMBIOS Table via WMI query complete...Success.

Reading TPM (Trusted Platform Module)state from SMBIOS WMI query...

Retrieving SMBIOS table (224)...length of table is [A] bytes...

SMBIOS table (224) is UEFI based...loading structs...

btTMState is [00]...

SMBIOS table (224) - (UEFI) TMState is [0]...

SMBIOS table (224) - (UEFI) TM TPM Type is [0]...

SMBIOS table (224) - (UEFI) TM Type is [0]...

SMBIOS table (224) - (UEFI) Opt ROM status is [0]...

SMBIOS table (224) - (UEFI) TM State is NOT active...

TPM State (Trusted Platform Module)Read Complete and Successful...

TPM (Trusted Platform Module) is in a CORRECT Setting...Installation will Continue...Success

Creating extraction directory for Smart Component [cp028189.exe]...

Extraction Directory Creation...Success...

Changing current directory to extraction directory [C:\Users\MyUser\AppData\Local\Temp\{E71367DE-5B5D-44F8-9015-F2E3F46D4419}]...

Setting of Current Directory to Extraction Directory [C:\Users\MyUser\AppData\Local\Temp\{E71367DE-5B5D-44F8-9015-F2E3F46D4419}]...Success...

Verifying required disk space for Smart Component Installation is available...

Required Disk Space for Installation is Available...Success...

Locating component definition XML file...

Component Definition XML File located...Installation will continue...Success

Now extracting component contents...

Extracting components complete...Success...

Extracting configuration file...

Extracting Config File Complete...Success...

Building installation command line...

Building Installation Command Complete...Success...


Executing setup utility - [cpqsetup.exe] - specified from component XML file...

Installation Command Line = ["C:\Users\MyUser\AppData\Local\Temp\{E71367DE-5B5D-44F8-9015-F2E3F46D4419}\cpqsetup.exe"  /silent /u C:\Users\MyUser\AppData\Local\Temp\HPSUM\localhost\cp028189_install.xml]

---------------------------------------------------------------------------
Setup Session Beginning   6/23/2016 - 16:23:21 PM
---------------------------------------------------------------------------
Command Line Parameters Given: /silent
Run with 4 Command Argument(s): C:\Users\MyUser\AppData\Local\Temp\{E71367DE-5B5D-44F8-9015-F2E3F46D4419}\cpqsetup.exe /silent /u C:\Users\MyUser\AppData\Local\Temp\HPSUM\localhost\cp028189_install.xml

cp028189.exe - Online ROM FlMyUser Component for Windows (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives
    Component Version: HPDE
    Component Build: 3397
    SOULAPI Version: 8.4.12.0
Attempting to open TASK XML file:
Any Supported?:        yes
Component Version:     HPDE
Oldest Device:         Drive 1I:1:12 (Smart Array P440ar in Slot 0) (HPDA)
Image Version:         HPDE
Installer State:       1
Name:            Online ROM FlMyUser Component for Windows (x64) - EG0300FBVFL, EG0450FBVFM, EG0600FBVFP, and EG0900FBVFQ Drives
New Version:     HPDE

Determining component installation state...
Setting Install State: 2

The software is installed but is not up to date.
 
Current Version: HPDA
 

 

  - the component will be updated to the new version

Jun 23 16:23:21 Begin flMyUser
Model: EG0300FBVFL
Location: Drive 1I:1:12 (Smart Array P440ar in Slot 0)
Current firmware HPDA, flMyUsering to HPDE
Build deferred mode 0x07 DDFF buffer: failure
Jun 23 16:23:23 Complete flMyUser, status 107
Halon flMyUser failed
    Error when building Halon object
Received an empty string
    Empty value for attribute: ::hal::STORAGE_API::PhysicalDriveAttrTFWDL
Jun 23 16:23:23 Begin flMyUser
Model: EG0300FBVFL
Location: Drive 1I:1:16 (Smart Array P440ar in Slot 0)
Current firmware HPDA, flMyUsering to HPDE
Build deferred mode 0x07 DDFF buffer: failure
Jun 23 16:23:23 Complete flMyUser, status 107
Halon flMyUser failed
    Error when building Halon object
Received an empty string
    Empty value for attribute: ::hal::STORAGE_API::PhysicalDriveAttrTFWDL
See log at C:\cpqsystem\log\\cp028189_2016_06_23_16_23_21.log
============ Summary ============
Smart Component Finished

Summary Messages
================
2 flMyUser attempts failed
See log at C:\cpqsystem\log\cpqsetup.log for details

Exit Status: 0
Halon flMyUser failed
    Error when building Halon object
Received an empty string
    Empty value for attribute: ::hal::STORAGE_API::PhysicalDriveAttrTFWDL
A fatal error occurred. See engineering log for details.
The installation procedure did not complete successfully.  An error occurred during the setup process.

Additional Information:
Halon flMyUser failed
    Error when building Halon object
Received an empty string
    Empty value for attribute: ::hal::STORAGE_API::PhysicalDriveAttrTFWDL
A fatal error occurred. See engineering log for details.



The operation was not successful.
---------------------------------------------------------------------------
End Session
---------------------------------------------------------------------------
Setup utility completed in 00hh:00mm:04s

Setup utility completed.

Process Returned Completion Code of (0x0).

Completion Code (0x0) -> The Smart Component failed to install

Translating return code... Translating Return Code...Done.
Updating component data...
Restoring current directory C:\Users\MyUser\AppData\Local\Temp\HPSUM\localhost... Done.


Log Session End. [16:23:27]
Return Code (0)
===========================================================================