ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Error installing Unixware 7.1.1 in Proliant ML350 G3

 
Andres Valentin Lopez
Occasional Advisor

Error installing Unixware 7.1.1 in Proliant ML350 G3

Hi

I´m trying to install SCO Unixware 7.1.1 in Proliant ML350 G3 but when the setup asks for diskette HBA drivers an error messages appears...

"Error when mounting diskette"

I upgraded the BIOS and the behavior is the same. I tried with 3 diskettes HBA drivers, not successful...

Any idea?

Thaks a lot
3 REPLIES
Marcos_34
Advisor

Re: Error installing Unixware 7.1.1 in Proliant ML350 G3

I'm on same trouble with a ML 530 G2 with an Smart Array 642. All disketts i've used had same error. "No valid HBA diskette, insert a valid one. Error when Mounting diskette."

We tried all kind of downloaded files from HP web site according to Compaq UnixWare 7 EFS Host Bus Adapter without successful.

OS is SCO Unixware 7.1.1 and HW is all certificated for this OS version.

If anyone know to solve this issue please advice me.

Thank in advance.
Marcos Souto from Spain.

Andres Valentin Lopez
Occasional Advisor

Re: Error installing Unixware 7.1.1 in Proliant ML350 G3

Hi..

I resolved it installing another scsi controller...

Thanks
Marcos_34
Advisor

Re: Error installing Unixware 7.1.1 in Proliant ML350 G3

Thank you.

I've done the solution from HP Customer Advisory document EU030103_CW02, from this link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_EU030103_CW02

Once we'd downloaded the patch from SCO that HP the HBA diskette was reconigced and the instalation continues normally.

Gracias.