ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Error messages on Proliant DL320 server

Sarah_32
Occasional Advisor

Error messages on Proliant DL320 server

I am getting two error messages on my Proliant DL320 server which I believe are connected..
"The Compaq Foundation Service depends on the SNMP service which failed to start because of the following error; The process terminated unexpectedly"

And..

"Compaq IDE ATA Status change. The ATA disk drive with model Maxtor 4G120J6 and serial number G602SBCE has a new status of 1. ATA disk status values. (1=other 2=ok 3=smartError 4=failed) (SNMP TRAP: 14004 in CPQIDE.MIB)

The SNMP service is stopping everytime I have to reboot the service.

Any ideas?
3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Error messages on Proliant DL320 server

Hi,

Update the PSP from Server then check again.

REgards,
Prashant S.
Nothing is impossible
Sarah_32
Occasional Advisor

Re: Error messages on Proliant DL320 server

I have done this and has not appeared to make any difference. I am now getting an SNMP application error when updating the Server Agents...
"The instruction at "0x77f0510e referenced memory at 0x00000004. The memory could not be written. Click on ok to terminate the application"
Sarah_32
Occasional Advisor

Re: Error messages on Proliant DL320 server

The SNMP service is also stopping itself even without the server being rebooted