ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Error occurred reading RIS copy

Alex_166
Occasional Contributor

Error occurred reading RIS copy

My Server model: System Model: ProLiant DL360 G5
When I run Array Diagnostic Utility,
I got this error report, is there anything wrong? I attached the full report here also.
Many thanks in advance for all your advice.

SLOT 0 Smart Array P400i Controller ERROR REPORT:

Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 1
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 2
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 3
Drive monitoring is NOT enabled for Port 1I, Box 1, Bay 4
Drive monitoring is NOT enabled for Port 2I, Box 1, Bay 5
Error occurred reading RIS copy from Port 1I, Box 1, Bay 1
Error occurred reading RIS copy from Port 1I, Box 1, Bay 2
Error occurred reading RIS copy from Port 1I, Box 1, Bay 3
Error occurred reading RIS copy from Port 1I, Box 1, Bay 4
Error occurred reading RIS copy from Port 2I, Box 1, Bay 5

 

 

P.S. This thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL). - Hp Forum moderator

1 REPLY
Godfred
Visitor

Re: Error occurred reading RIS copy

For more info refer Document ID: c01081143

The messages have no affect on the performance or functionality of the server or the ADU and can be safely ignored. A future version of the ADU will prevent the false messages from occurring.