HPE Community
ProLiant Servers (ML,DL,SL)
1752777 Members
6417 Online
108789 Solutions
New Discussion

Error while installing Network Utility on ProLiant DL360e Gen8

 
shukei98
New Member

‎04-25-2016 02:27 AM

‎04-25-2016 02:27 AM

Error while installing Network Utility on ProLiant DL360e Gen8

Hi there,

I was trying to install network utility (for NIC teaming purpose) cp027291.exe but face an error as below:

The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system. 

Kindly help. Thank you.

Regards,

Steve Lew

sclew@nvasia.com.my

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎04-25-2016 05:06 AM - edited ‎04-25-2016 05:07 AM

‎04-25-2016 05:06 AM - edited ‎04-25-2016 05:07 AM

Re: Error while installing Network Utility on ProLiant DL360e Gen8

Sure this is correct?

IMHO not.

Description of this software:

The HPE ProLiant Converged Network Utility (CNU) is a stand-alone application for configuring HPE FlexFabric and StoreFabric network adapters for iSCSI and FCoE ports. CNU enables configuration of iSCSI and FCoE storage interfaces in both Flex and non-Flex mode.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
PGTRI
Honored Contributor

‎04-28-2016 06:52 AM

‎04-28-2016 06:52 AM

Re: Error while installing Network Utility on ProLiant DL360e Gen8

hi,

Please provide info about the NIC and the OS.

thanks

How to Say Thank You? Just click the KUDOS!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.