HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Error while installing Network Utility on ProLiant DL360e Gen8

 
shukei98
Occasional Visitor

Error while installing Network Utility on ProLiant DL360e Gen8

Hi there,

I was trying to install network utility (for NIC teaming purpose) cp027291.exe but face an error as below:

The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system. 

Kindly help. Thank you.

Regards,

Steve Lew

sclew@nvasia.com.my

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Error while installing Network Utility on ProLiant DL360e Gen8

Sure this is correct?

IMHO not.

Description of this software:

The HPE ProLiant Converged Network Utility (CNU) is a stand-alone application for configuring HPE FlexFabric and StoreFabric network adapters for iSCSI and FCoE ports. CNU enables configuration of iSCSI and FCoE storage interfaces in both Flex and non-Flex mode.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
PGTRI
Honored Contributor

Re: Error while installing Network Utility on ProLiant DL360e Gen8

hi,

Please provide info about the NIC and the OS.

thanks

How to Say Thank You? Just click the KUDOS!