cancel
Showing results for 
Search instead for 
Did you mean: 

Errors

Ayman Altounji
Valued Contributor

Errors

I have a fresh install of SCO OS 5.0.6, all licenses and current ROMPAQ's are installed and had to call in a repair to our tape drive, which is still out. Has anyone seen these?? I can provide more info if necessary
Thanks,
Chris
NOTICE: ida0: slot 6: invalid request on dev 131/0 blk 256
logical unit=0, block=256, size=5, cmd=0xA8, status=0x10

NOTICE: cha: SCSI bus has been reset ha=1
Attached SCSI peripherals will return to power up state (chaN04)
1 REPLY
Ayman Altounji
Valued Contributor

Re: Errors

It seems to be a problem between the Insight manager and the SMART controller.
Check my post from Feb 14