Event ID 1123

[Emanuel_5]

Hi,
We have installed W2K on one of DL380s and when we added an extra Array3200 the following error message is coming up:
"Warning: Compaq System Information Agent: Compaq Health: POST Errors Detected. One or more POST errors detected during server setup[SNMP Trap: 6027 in CPQHLTH.MIB]"
Thanks for all the replies,

[Sunil Jerath · Accepted solution]

Hello Emanuel,
This due to the fact that our CIM agent detects a 1785-xx POST error (Drive array was not configured). The POST and Event Log error reoccurred since there was no drive connected to 3200. Once a HDD drive is connected to the Smart array 3200 and configured as a logical drive with ACU, the POST error will be resolved. As a result, the Event Log error 1123 will go away. The error is informational and should not functionally impair the server's performance.
I hope this helps.

[Emanuel_5]

Sunil,
Would you know what is the latest bios version of Array 3200 controller?? Presently we have 3.08.
Thanks

[Sunil Jerath]

Hello Emanuel,
It's 4.50 and you can download it from the following link:
http://h18007.www1.hp.com/support/files/server/us/download/14694.html

Just make the first diskette only because you dont need the other three.

Regards,

[Emanuel_5]

Sunil,
Thanks for your prompt response. Now we'r getting a strange error during POST about the firmware of the hard drives. What do we do??
Thanks

[Sunil Jerath]

Emanuel,
Just download the SoftPaq from the following link. Make the very first diskette. When you cold boot the system with this diskette it will then tell you as to which other disks do you require for the existing HDDs. You do not need to make all 10 disks rightaway.

http://h18007.www1.hp.com/support/files/server/us/download/17149.html

Cheers,