HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Event ID 15 : source: cpqarray2

 
Ayman Altounji
Valued Contributor

Event ID 15 : source: cpqarray2

I am getting the following error in my system event log.

Source: cpqarry2
Event ID: 15

The device, \Device\Scsi\cpqarry21, is not ready for access yet.

has anyone ever seen this and if so, how to correct problem

Thank you
1 REPLY
Ayman Altounji
Valued Contributor

Re: Event ID 15 : source: cpqarray2

Description:

Any Compaq server configured with any Compaq Smart Array Controller and
running Microsoft Windows 2000 with CPQARRY2.SYS Version 5.4.0.0 from the
Compaq Support Paq Version 5.04A for Windows 2000, may display the
following error in the Event Viewer after rebooting:

"Event ID 15, The Device..\Device\SCSI\cpqarry21, is not ready for
access yet"

Resolution:

Disregard this message, as it is an informational message only. It only
occurs during reboot, and does not affect the functionality of the
controller.

NOTE:
Any Compaq server configured with any Compaq Smart Array Controller and
running Microsoft Windows 2000 with CPQARRY2.SYS Version 5.4.0.0, from the
Compaq Support Paq Version 5.04A for Windows 2000. This issue should be fixed with smart start version 5.0 due out in a few weeks

Operating Systems Affected: Microsoft Windows 2000