Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Expanding Existing Capacity of RAID 5 Array

SOLVED
Go to solution
Dhanushka_SNK
Occasional Visitor

Expanding Existing Capacity of RAID 5 Array

Dear All,

 

Currently I'm Using HP Proliant DL380 G5 server with HP Smart Array P400 RAID Controller. 3 146GB SAS 10k disks are attached to the Array and 3 Logical Partitions are Created for User Data. Now I'm running out of Disk space and Plan to Upgrade the server by attaching 3 more 146GB SAS disks. I have few concerns on following areas;

 

  1. Can I add more Disks to the existing Disk Array ( In my Scenario 3 more disks) with out braking the array?
  2. Can I Expand the capacity of Logical Partition's sizes of Exsisting partition?
  3. What are the software tools can I use?
  4. Can all this operation run On-Line?

Please advice me on this

 

 

P.S. This thread has been moved from Community Feedback & Suggestions to ProLiant Servers (ML,DL,SL).- Hp Forum Moderator

2 REPLIES
Alex Geroulaitis
Respected Contributor
Solution

Re: Expanding Existing Capacity of RAID 5 Array

Yes to all of it. The tools: HP array management utility, and OS disk management. If OS disk management can't resize partitions (WS 2003 perhaps), 3rd party partitioning tools should work too.

 

That said, you might want to report your question in ProLiant Servers. You're in "Community Feedback" right now.

Systems Administrator
(if my post was helpful, please "mark as a solution" or give "kudos" - thanks)
Highlighted
Dhanushka_SNK
Occasional Visitor

Re: Expanding Existing Capacity of RAID 5 Array

Thank you very much