HPE Community
ProLiant Servers (ML,DL,SL)
1753500 Members
4161 Online
108794 Solutions
New Discussion

External Storage System (MSA1500) fan status failed

 
Ray Krystofolski
Occasional Contributor

‎09-11-2009 06:40 AM

‎09-11-2009 06:40 AM

External Storage System (MSA1500) fan status failed

We have an MSA1500 SAN storage array attached to a Proliant DL380 G4 Server. One of the blowers on the power supplies in an MSA30 enclosure failed. System Management Homepage (SMH) showed the fan as failed, as did the Integrated Management Log(IML)viewer. The failed blower was replaced, the IML was cleared, but the (SMH) still shows the blower as failed. Using SNMP as the data source in SMH. Server is running W2K3 SP2. IMA version is 8.26.0.0, SMH version is 3.0.1, and Version Control is not installed. Everything elese in SMH works fine. Also un-installed SMH & IMA and re-installed SMH & IMA, and problem still persists. Software is from PSP v8.25 release.

Any ideas on how to rectify?

ray.krystofolski@tesbank.com
never get yourself into a situation, where you are overpaid for the job you are doing
0 Kudos
Reply
1 REPLY 1
Ray Krystofolski
Occasional Contributor

‎09-11-2009 06:53 AM

‎09-11-2009 06:53 AM

Re: External Storage System (MSA1500) fan status failed

Typo clarification.....
should be ray.krystofolski@yesbank.com
never get yourself into a situation, where you are overpaid for the job you are doing
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.