ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

External Storage System (MSA1500) fan status failed

Ray Krystofolski
Occasional Contributor

External Storage System (MSA1500) fan status failed

We have an MSA1500 SAN storage array attached to a Proliant DL380 G4 Server. One of the blowers on the power supplies in an MSA30 enclosure failed. System Management Homepage (SMH) showed the fan as failed, as did the Integrated Management Log(IML)viewer. The failed blower was replaced, the IML was cleared, but the (SMH) still shows the blower as failed. Using SNMP as the data source in SMH. Server is running W2K3 SP2. IMA version is 8.26.0.0, SMH version is 3.0.1, and Version Control is not installed. Everything elese in SMH works fine. Also un-installed SMH & IMA and re-installed SMH & IMA, and problem still persists. Software is from PSP v8.25 release.

Any ideas on how to rectify?

ray.krystofolski@tesbank.com
never get yourself into a situation, where you are overpaid for the job you are doing
1 REPLY
Ray Krystofolski
Occasional Contributor

Re: External Storage System (MSA1500) fan status failed

Typo clarification.....
should be ray.krystofolski@yesbank.com
never get yourself into a situation, where you are overpaid for the job you are doing