ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

F1 bootup issues DL380 G1

SOLVED
Go to solution
Tim Jung
Occasional Visitor

F1 bootup issues DL380 G1

I have a Proliant DL380 (G1) that, upon bootup, keeps prompting me to select either F1 to continue or F10 to enter diagnostic utilities. Once I select F1, the servers bots to the OS and everything works fine. I used SCU to determine that the bot order is correct. Any suggestions?
5 REPLIES
Oleg Koroz
Honored Contributor

Re: F1 bootup issues DL380 G1

Access to F10 and under settings: System Configuration > System Settings > Ctrl + A > Accept > Review and Modify > Edit Details > find F1 Prompt and make Modification to disabled
Tim Jung
Occasional Visitor

Re: F1 bootup issues DL380 G1

Thanks for the tip. Unfortunately, the previous tech deleted the system partition so I wil look for a diskette version and access F10 from there.
Oleg Koroz
Honored Contributor
Solution

Re: F1 bootup issues DL380 G1

Tim Jung
Occasional Visitor

Re: F1 bootup issues DL380 G1

Thanks for the link. I'll have to artition magic the drive so I can install SCU without having to rebuild the server. Thanks for all your help.
Tim Jung
Occasional Visitor

Re: F1 bootup issues DL380 G1

Thanks for the info.